SalonshiGuidesOpen your studio in Salonshi

Salonshi / Guides

Nail studio equipment and sterilization: an opening checklist

Equipment decides how comfortable your nail techs are at work, and sterilization decides whether the client comes back. Below is an opening checklist: what each station needs and how to set up tool processing you would be proud to show.

Updated: ยท 6 min read

The nail tech's station

Every station needs its own set. Sharing an e-file or a lamp between two nail techs is inconvenient and slows work down.

WhatWhyWhat to look for
Manicure tablethe base of the stationwashable surface, room for a dust extractor, storage drawers
Nail tech chair6-8 hours a day sittingheight adjustment, back support
Client chaircomfort for 1.5-3 hoursstable, washable upholstery
Hand rest for the clientprecise workwashable, with a removable cover
Desk lampprecise work and true colorcool or neutral light, high color rendering
Dust extractorfiling dustbuilt into the table or standalone, with a replaceable filter
E-file (nail drill)removing product, prep worksmooth speed control, quiet, no vibration
UV/LED curing lampcuring gel polishcompatible with the products you use
Trolley or organizereverything within reachclosed drawers, easy to clean

For pedicure, add a pedicure chair or a chair with a footrest, a foot bath and a separate tool set. For brows and lashes: a treatment bed, a lamp over the work area and a mirror.

Dust extraction and ventilation

Filing dust and product fumes settle in a nail tech's lungs every day. This is not the place to save money.

  • A dust extractor at every station, running the whole time filing is going on.
  • Change filters as the manufacturer instructs: a clogged filter pulls almost nothing.
  • General ventilation: a window or a supply and exhaust system, especially if several nail techs work in the room.
  • Masks for nail techs when removing product and filing.

The tool processing chain

Reusable metal tools go through three stages after every client. You cannot skip any of them: a sterilizer cannot handle a dirty tool.

  1. Cleaning. Remove visible debris: filing dust, bits of skin, product. With a brush under water or in a solution.
  2. Disinfection. Immerse in disinfectant solution for the contact time the manufacturer specifies. A product that cleans and disinfects at once is common. Then rinse and dry.
  3. Sterilization. Pack in a sterilization pouch with an indicator, seal it and sterilize in a dry heat sterilizer or autoclave using the cycle from the instructions.

After the cycle, pouches stay sealed and are opened in front of the client. This is both hygiene and the best marketing: the client sees the tools are sterile.

Dry heat sterilizer or autoclave

ParameterDry heat sterilizerAutoclave
How it workshot dry airpressurized steam
Cyclelonger, plus cooling timeusually faster, depends on the model
Pricemore affordablenoticeably more expensive
What mattersaccurate temperature, even heating, timerregular servicing, distilled water
Best fora home studio, a 1-2 station studioa studio with several nail techs and high volume

Both work for metal manicure tools if the device is good quality and you follow the manufacturer's cycle. UV cabinets and glass bead sterilizers do not replace proper sterilization: a UV cabinet is only good for storing tools that are already sterile.

Pouches and indicators

  • Choose pouches for your type of sterilizer: dry heat and autoclave pouches are different.
  • The indicator on the pouch changes color when the cycle conditions are met. If it did not change: the tools are not sterile, repeat the cycle.
  • Write the sterilization date on the pouch. How long a sealed pouch can be stored is in the manufacturer's instructions.
  • A torn, wet or opened pouch: the tools go back to cleaning.

Sterilization log

A simple log protects you if a client complains and keeps the team disciplined. It is enough to record:

  • date and time of the cycle;
  • cycle settings (temperature and time);
  • how many pouches were loaded;
  • the indicator result;
  • who ran the cycle.

You can keep it in a notebook or a shared spreadsheet. Check the device with control indicators at regular intervals, if the manufacturer recommends them.

How many tool sets you need

A sterilization cycle with prep and cooling takes longer than one service. So each nail tech needs several sets:

  • At least 3 sets per nail tech per shift: one in use, one in the sterilizer, one ready.
  • 4-5 sets if bookings are back to back with no breaks, or there is one sterilizer for the whole studio.
  • A manicure set usually includes nippers, a pusher, scissors, tweezers if needed, and e-file bits. Bits go through the full chain too.

Check against your own schedule: how many clients a nail tech sees in a row and how long a full cycle of your sterilizer takes.

Disposables and waste

Anything that cannot be properly sterilized must be disposable:

  • files, buffers, orange sticks, pedicure sanding caps;
  • gloves and disposable towels or wipes;
  • disposable attachments and sanding bands, if you use them.

Waste:

  • A sharps container: rigid, with a lid, for blades and anything that could pierce a bag.
  • A separate closable bin for waste with biological material.
  • How to dispose of this waste in your city: check with local services or your supplier.

Opening checklist

  • Table, nail tech chair and client chair for every station
  • Lamp, dust extractor, e-file and curing lamp for every station
  • A sink for tools and disinfectants
  • Dry heat sterilizer or autoclave, pouches with indicators for your device
  • 3-5 tool sets per nail tech
  • Sterilization log
  • Disposable files, buffers, gloves, towels
  • Sharps container and a closable bin
  • First aid kit and equipment manuals in an easy-to-reach place

Once the equipment is bought, the next question is filling the calendar. Online booking, deposits and WhatsApp reminders help fill stations and stop losing slots to no-shows. How to set it up is in the guide on online booking. Salonshi does this out of the box: a studio booking page, deposits and reminders.

FAQ

Can I skip the sterilizer and only disinfect?

For reusable metal tools that touch the skin and can break it, disinfection alone is not enough. You need the full chain: cleaning, disinfection and sterilization. Clients ask about this more and more often and choose studios where the pouch is opened in front of them.

Which is better for a small studio: dry heat or autoclave?

For one or two nail techs, a good dry heat sterilizer with accurate temperature and a timer is usually enough. An autoclave makes sense when there are more nail techs and lots of tools to process quickly. Either way, follow the cycle in the manufacturer's instructions.

How many tool sets do I need if I work alone?

At least three: one in use, one in the sterilizer, one ready. If your clients come back to back with no breaks, four or five is better, so you never wait for a cycle to finish.

Bookings and deposits for your studio

Salonshi gives your studio a booking page, deposits and WhatsApp reminders for clients. Set up in an evening.

Open your studio in Salonshi

Read next